The OMG Lite-Deck Fastener can be installed into cementitious wood fiber decks without predrilling. A pilot hole is required for gypsum and lightweight concrete. Hole size is determined by pullout results. The OMG Lite-Deck Fastener must penetrate the deck a minimum of 2". Using a screwshooter, drive the fastener until a slight depression is seen around the plate, or with very rigid insulation boards, watch for the plate to dimple.
Note: Prior to job bid, contact OMG to perform a pullout test to determine the pullout values. Also, care must be taken not to overdrive the fastener, causing subsequent damage to the insulation facer. Fastener must be tight enough so that the plate doesn't turn.
