• The OMG ASAP® greatly reduces installation time and labor costs.
• The OMG Standard Roofing Fastener assembled with an OMG 3" Galvalume®
  Plate.
• No special installation tool required.
• Steel plate sits flat on Dens Deck and other high density insulations.

The OMG ASAP® must penetrate steel decks a minimum of 3/4", wood plank decks a minimum of 1" and 1/2" through the underside for plywood decks.  Using a screwshooter, drive the fastener until a slight depression is seen around the plate, or with very rigid insulation boards, watch for the plate to dimple. 

For the fastest, most effective method of installation, use the OMG TallBoy® or ShortBoy®  tool.

Note: Care must be taken not to overdrive the fastener and fracture the skin of the insulation. Fastener must be tight enough so that the plate doesn’t turn. For steel decks, Factory Mutual requires that the fastener penetrates the deck at the top flute.

OMG CR-10 corrosion resistant coating exhibits less than 15% red rust after 30 Kesternich cycles.  CR-10 coating exceeds F.M. Approval Standard 4470.