See the AccuTrac Savings! Enter your data into the gray squares. 

Reset Form
Calculate using Loose Screws and Plates
Return to AccuTrac Page

*NOTE: Times presented represent the industry average time taken to install fasteners and plates, either loose, assembled (ASAP) or with the AccuTrac System. This includes the actual drill time, walking to the next plate, as well as bending and stretching, etc. The average time is determined by overall installation time divided by the number of fasteners installed.

OMG Roofing Products

ASSEMBLED SCREWS & PLATES
(2 men: 1 placing ASAPs/1 fastening)


 × 8.2 sec. per fastener*
per 2-man crew
divided by 3600 sec. per hour 		= 0.00
Hours to Install

× 2 men times
0.00 Hours 		= $0.00
Total Labor Cost

× # of Fasteners
divided by 1000 		= $0.00
Total Material Cost
  $0.00
TOTAL COST

ACCUTRAC SYSTEM (1 man using AccuTrac tool)

1000
Total # of Fasteners		 × 5.5 sec. per fastener* per 1-man crew divided by 3600 sec. per hour = 0.00
Hours to Install
0.00
Hourly Labor Rate		 × 0.00 Hours = $0.00
Total Labor Cost

×

# of Fasteners divided by 1000

 = $0.00
Total Material Cost
  $0.00
TOTAL COST

YOUR SAVINGS!

HOURS SAVED 0.00
LABOR & MATERIAL COST SAVED $0.00